Juno IC1, 4" Down Light Housings 4 inch Round IC Rated Outdoor Recessed New Construction Can

 Fixture 
Blade Thumb
 
Stock Status
10+
In Stock
as of Apr 26, 11:57 AM
FREE Shipping
Ships in 2 to 3 days
  • 4 inch Aperture
  • 0 Total Watts
  • UL & CUL/CSA Wet Listed
  • 0 Volts
SKU: IC1
MSRP: $87.48
Save 33%
Our Price: $58.32


Fixture Dimensions
Dimensions of the IC1
A
9.13"
B
6.00"
C
6.00"
D
12.00"
E
13.50"
F
N/A
  • 4.5" Ceiling Cutout
  • 13.5" bars break away to reduce to 8.5"
    Shade
-
Holophane Prismatic Frost Glass
    Suggested Room
-
Kitchen, Foyer, Dining Room, Bathroom, Hallway
    Light Control
-
Dimmable with light dimmers
    Accessories
-
Not Included
    Housing
-
IC Rated, Compact Sized New Construction 120 Volt Incandescent Housing
    Rating
-
UL & C-UL/CSA certified for through-branch wiring, damp and wet locations. Washington State, IECC and MEC energy codes as tested p UL & C-UL/CSA certified for through-branch wiring, damp and wet locations. Washington State, IECC and MEC energy codes as tested p
    Bulb Included
-
NO
Juno IC1, 4" Down Light Housings 4 inch Round IC Rated Outdoor Recessed New Construction Can
  • 4 inch Aperture
  • 0 Total Watts
  • UL & CUL/CSA Wet Listed
  • 0 Volts
UPC: 066120970000
IC rated, energy efficient Air-Loc sealed double wall construction housing does not require separate Air-Loc gasket. Can be completely covered with insulation. Air-Loc housing with all trims stops infiltration and exfiltration of air, reducing heating and cooling costs.
  • 4" Housing
  • Medium base porcelain socket with nickel-plated copper screw shell
  • Housing is vertically adjustable to accommodate up to a 1: ceiling thickness
  • Aluminum housing is fully assembled for ease of installation
  • Shipped with socket cap to protect against paint overspray
  • Real Nail 3 bar hangers: telescoping system with pre-installed removable nail for easy repositioning of housing in joist construction
  • Integral T-bar clip for secure installation in suspended ceilings
  • Patented breakaway bars for tight joist spacing
  • Bar hangers may be re-positioned 90°
  • Curved foot facilitates alignment with joist bottom
  • Quick-Loc slot and oversized set screw lock fixture in position
  • Pre-wired junction box with (6) 1/2" and (1) 3/4" knockouts with pryout slots, (4) Romex connectors and ground wire
  • Shadow-free, knife-edge trim design blends smoothly into the ceiling and allows architectural continuity with Aculux trims
  • UL Listed, C-UL/CSA certified for through-branch wiring, maximum (6) #12 AWG minimum 90° C branch circuit conductors (3 in, 3 out)
  • Thermally protected against improper use of lamps