Juno IC44N, 4" Low Voltage Round IC Rated Outdoor Recessed New Construction Can Halogen

 Fixture 
Blade Thumb
 
10+
In Stock
as of Jul 11, 10:01 AM
FREE Shipping
Ships in 2 to 3 days
  • 4 inch Aperture
  • 0 Total Watts
  • UL & CUL/CSA Wet Listed
  • 120 Volts
SKU: IC44N
MSRP: $218.00
Save 33%
Our Price: $145.33
Qty:


Fixture Dimensions
Dimensions of the IC44N
A
15.50"
B
7.63"
C
9.13"
D
18.25"
E
13.50"
F
N/A
  • 4.5" Ceiling Cutout
  • 13.5" bars expand to 25"
    Rating
-
UL & C-UL/CSA certified for through-branch wiring, damp and wet locations. Washington State, IECC and MEC energy codes as tested p UL & C-UL/CSA certified for through-branch wiring, damp and wet locations. Washington State, IECC and MEC energy codes as tested p
    Height
-
7.625"
    Width
-
15.5"
    Mounting Hardware
-
All necessary mounting hardware included
    Installation
-
Ceiling Junction Box Required
    Hanging Weight
-
36LB
    Wiring
-
Hard Wire
    Shade
-
Holophane Prismatic Frost Glass
    Bulb Included
-
NO
    Volts
-
120 Volts
Juno IC44N, 4" Low Voltage Round IC Rated Outdoor Recessed New Construction Can Halogen
  • 4 inch Aperture
  • 0 Total Watts
  • UL & CUL/CSA Wet Listed
  • 120 Volts
UPC: 066120901714
IC rated, low voltage, energy efficient, Air-Loc sealed double wall construction housing does not require separate Air-Loc gasket. Can be completely covered with insulation. Air-Loc housing with all trims stops infiltration and exfiltration of air, reducing heating and cooling costs.
  • 4" Housing
  • Ceramic bi-pin socket with aluminum heat shield
  • Aluminum housing is fully assembled for ease of installation
  • Real Nail 3 bar hangers: telescoping system with pre-installed removable nail for easy repositioning of housing in joist construction
  • Patented break-away bars for tight joist spacing
  • Bar hangers may be re-positioned 90°
  • Curved foot facilitates alignment with joist bottom
  • Pre-wired junction box with (6) 1/2" and (1) 3/4" knockouts with pryout slots, (4) Romex connectors, and ground wire
  • Shadow-free, knife-edge trim design blends smoothly into the ceiling and allows architectural continuity with Aculux trim
  • UL Listed, C-UL/CSA certified for through-branch wiring, maximum (6) #12 AWG minimum 90° C branch circuit conductors (3 in, 3 out)
  • Thermally protected against improper use of lamps