Juno TC44, 4" Low Voltage Round Non-IC Outdoor Recessed New Construction Can Halogen

 Fixture 
Blade Thumb
 
10+
In Stock
as of Jul 11, 10:01 AM
FREE Shipping
Ships in 3 to 5 days
  • 4 inch Aperture
  • 0 Total Watts
  • UL & CUL/CSA Wet Listed
  • 120 Volts
SKU: TC44
MSRP: $145.02
Save 33%
Our Price: $96.68
Qty:


Fixture Dimensions
Dimensions of the TC44
A
9.13"
B
5.38"
C
6.75"
D
12.25"
E
13.50"
F
N/A
  • 4.5" Ceiling Cutout
  • 13.5" bars expand to 25"
  • Bars break away to 8.5"
    Rating
-
UL & C-UL/CSA certified for through-branch wiring, damp and wet locations. Conforms with City of Chicago IP requirements. UL & C-UL/CSA certified for through-branch wiring, damp and wet locations. Conforms with City of Chicago IP requirements.
    Height
-
5.375"
    Width
-
9.13"
    Mounting Hardware
-
All necessary mounting hardware included
    Installation
-
Ceiling Junction Box Required
    Hanging Weight
-
19LB
    Wiring
-
Hard Wire
    Shade
-
Holophane Prismatic Frost Glass
    Bulb Included
-
NO
    Volts
-
120 Volts
Juno TC44, 4" Low Voltage Round Non-IC Outdoor Recessed New Construction Can Halogen
  • 4 inch Aperture
  • 0 Total Watts
  • UL & CUL/CSA Wet Listed
  • 120 Volts
UPC: 066120900233
Non-IC rated low voltage housing. Designed to be installed in non-insulated areas, or where insulation is spaced at least 3" from housing
  • 4" Housing
  • Ceramic bi-pin socket with aluminum heat shield
  • Housing is vertically adjustable to accommodate up to a 1 1/4" ceiling thickness
  • Steel housing is fully assembled for ease of installation
  • Real Nail 3 bar hangers: telescoping system with pre-installed removable nail for easy repositioning of housing in joist construction
  • Integral T-bar clip for secure installation in suspended ceilings
  • Patented breakaway bars for tight joist spacing
  • Patented breakaway bars for tight joist spacing
  • Bar hangers may be re-positioned 90°
  • Curved foot facilitates alignment with joist bottom
  • Quick-Loc slot and oversized set screw lock fixture in position
  • Pre-wired junction box with (5) 1/2" and (1) 3/4" knockouts with pryout slots, (4) Romex connectors and ground wire
  • Shadow-free, knife-edge trim design blends smoothly into the ceiling and allows architectural continuity with Aculux trims
  • UL Listed, C-UL/CSA certified for through-branch wiring, maximum (8) #12 AWG minimum 90° C branch circuit conductors (4 in, 4 out)
  • Thermally protected against improper use of lamps or insulation