Juno IC926, 6" Sloped Housings 6 inch Round IC Rated Outdoor Recessed New Construction Can

 Fixture 
Blade Thumb
 
10+
In Stock
as of Jul 11, 10:01 AM
FREE Shipping
Ships in 2 to 3 days
  • 6 inch Aperture
  • 0 Total Watts
  • UL & CUL/CSA Wet Listed
  • 120 Volts
SKU: IC926
MSRP: $99.11
Save 33%
Our Price: $66.07
Qty:


Fixture Dimensions
Dimensions of the IC926
A
13.13"
B
7.50"
C
8.31"
D
16.00"
E
13.50"
F
N/A
  • 7 1/32" x 6 11/16" Oval Ceiling Cutout
  • 13.5" bars expand to 25"
    Rating
-
UL & C-UL/CSA certified for through-branch wiring, damp and wet locations. Washington State, IECC and MEC energy codes as tested p UL & C-UL/CSA certified for through-branch wiring, damp and wet locations. Washington State, IECC and MEC energy codes as tested p
    Height
-
7.5"
    Width
-
13.13"
    Mounting Hardware
-
All necessary mounting hardware included
    Installation
-
Ceiling Junction Box Required
    Hanging Weight
-
20LB
    Wiring
-
Hard Wire
    Shade
-
Holophane Prismatic Frost Glass
    Bulb Included
-
NO
    Volts
-
120 Volts
Juno IC926, 6" Sloped Housings 6 inch Round IC Rated Outdoor Recessed New Construction Can
  • 6 inch Aperture
  • 0 Total Watts
  • UL & CUL/CSA Wet Listed
  • 120 Volts
UPC: 066120900089
IC rated, energy efficient Air-Loc double wall construction housing for use in 2/12 to 6/12 pitch slopes (9° to 27°). Can be completely covered with insulation. Air-Loc installation stops infiltration and exfiltration of air, reducing heating and cooling costs. Juno's patented Slope Ceiling Down-Lites direct light straight down, providing proper lighting from a sloped surface.
  • 6” Standard slope housing (oval)
  • Oblique angle housing design holds trims flush with the ceiling
  • Adjustable socket plate permits lamp to remain perpendicular to floor through entire pitch range
  • Medium base porcelain socket with nickel-plated copper screw shell
  • Housing is vertically adjustable to accommodate up to a 1” ceiling thickness
  • Real Nail 3 bar hangers: telescoping system with pre-installed removable nail for easy repositioning of housing in joist construction
  • Integral T-bar clip for secure installation in suspended ceilings
  • Patented break-away bars for tight joist spacing
  • Bar hangers may be re-positioned 90°
  • Curved foot facilitates alignment with joist bottom
  • Quick-Loc slot and oversized set screw lock fixture in position
  • Housing is fully assembled for ease of installation
  • Pre-wired junction box with (5) 1/2” and (1) 3/4” knockouts with pryout slots, (4) Romex connectors, and ground wire
  • Shadow-free, knife-edge trim design blends smoothly into the ceiling and allows architectural continuity with Aculux trims
  • Angle-cut baffles ensure grooves remain parallel to the floor to provide proper optics
  • UL Listed, C-UL/CSA certified for through-branch wiring, maximum (8) #12 AWG branch circuit conductors (4 in, 4 out)
  • Thermally protected against improper use of lamps