Shop Safe with Del Mar Designs
800-724-5501
Mon-Fri: 8:30 - 6, Sat: 10 - 4 EST
Home > Lighting > Juno > 6" Recessed Lighting Can
Email

Juno TC926R, 6" Sloped Down Light Housings 6 inch Round Non-IC Outdoor Recessed Can Remodel Can

Juno
juno tc926r 6" sloped down light housings recessed lighting
 Light 
 
Related Products:
 6 inch recessed cans   6 inch recessed cans
Stock Status
10+
In Stock
as of Apr 26, 11:57 AM
$4.79 Shipping
Ships in 2 to 3 days
  • 6 inch Aperture
  • 0 Total Watts
  • UL & CUL/CSA Wet Listed
  • 0 Volts
SKU: TC926R
 
MSRP: $74.96
Save 33%
Our Price: $49.97


Expert Review

See how we rate
3.5

(overall)

Reviewed by Del Mar

Dimensions not available
A
16.50"
B
7.50"
C
6.88"
D
N/A
E
N/A
F
N/A

  • Housing Adjusts from 7.5" to 9" maximum height
  • 6 1/2" x 6 7/8" Oval Ceiling Cutout

    Shade
-
Holophane Prismatic Frost Glass
    Suggested Room
-
Kitchen, Foyer, Dining Room, Bathroom, Hallway
    Light Control
-
Dimmable with light dimmers
    Accessories
-
Not Included
    Housing
-
Non-IC Rated, 120 Volt Incandescent Remodel Housing
    Rating
-
UL & C-UL/CSA certified for through-branch wiring, damp and wet locations. Conforms with City of Chicago IP requirements. UL & C-UL/CSA certified for through-branch wiring, damp and wet locations. Conforms with City of Chicago IP requirements.
    Light Bulb
-
Lamp wattage ratings and apertures based on trim selection
    Bulb Quantity
-
1
    Bulb Included
-
NO
Juno TC926R, 6" Sloped Down Light Housings 6 inch Round Non-IC Outdoor Recessed Can Remodel Can
  • 6 inch Aperture
  • 0 Total Watts
  • UL & CUL/CSA Wet Listed
  • 0 Volts
UPC: 066120906033
Non-IC rated remodel housing for use in 2/12 to 6/12 pitch slopes (9° to 27°) where the back side of the ceiling is not accessible. Designed to be installed in non-insulated areas or where insulation is spaced at least 3” from housing. Juno's patented Slope Ceiling Down-Lites direct light straight down, providing proper lighting from a sloped surface.
  • 6” Standard slope housing (oval)
  • Oblique angle housing design holds trims flush with the ceiling
  • Adjustable socket plate permits lamp to remain perpendicular to floor through entire pitch range
  • Medium base porcelain socket with nickel-plated copper screw shell
  • Housing is vertically adjustable to accommodate up to a 1” ceiling thickness
  • Housing is secured in place with factory supplied remodel clips
  • Telescoping height for use in 2x8 or 2x10 construction
  • Pre-wired junction box with (4) 1/2” knockouts with pryout slots, (4) Romex connectors, and ground wire
  • Shadow-free, knife-edge trim design blends smoothly into the ceiling and allows architectural continuity with Aculux trims
  • Angle-cut baffles ensure grooves remain parallel to the floor to provide proper optics
  • UL Listed, C-UL/CSA certified for through-branch wiring, maximum (4) #12 AWG branch circuit conductors (2 in, 2 out)
  • Thermally protected against improper use of lamps